3D Material Technologies

810 Flightline Blvd, DeLand, Florida 32724, United States of America

3dmt-logo.png
Additive Aluminum bracket built using the EOS System

Additive Aluminum bracket built using the EOS System

Additive 17-4 Stainless 1/8” Diameter tubes with multiple .012” holes in the tip.  Parts built using Concept Laser Machines.

Additive 17-4 Stainless 1/8” Diameter tubes with multiple .012” holes in the tip. Parts built using Concept Laser Machines.

Additive Inconel 718 Stator Segment.  The part on the right is that As Built part and the part on the left was finished using the MicroTek Finishing process.  Parts built using Concept Laser Machines

Additive Inconel 718 Stator Segment. The part on the right is that As Built part and the part on the left was finished using the MicroTek Finishing process. Parts built using Concept Laser Machines

Additive Aluminum bracket built using the EOS System
Additive 17-4 Stainless 1/8” Diameter tubes with multiple .012” holes in the tip.  Parts built using Concept Laser Machines.
Additive Inconel 718 Stator Segment.  The part on the right is that As Built part and the part on the left was finished using the MicroTek Finishing process.  Parts built using Concept Laser Machines
Your browser does not support the HTML5 Geolocation API. Enter your address in the text field above and try again.
You denied permission to use your current location. Enter an address in the text field above or change your location sharing settings for this page.
Unable to find your current location. Enter an address in the text field above and try again.
Location search timed out. Enter an address in the text field above and try again.
810 Flightline Blvd, DeLand, Florida 32724, United States of America
Contract Service Provider