TCT (Page 224)

Dimensionics launches density determination technology for 3D printing

Dimensionics Density has announced the commercial introduction of a density determination technology for 3D printing, which contributes to the automation of the AM process chain.

By Oliver Johnson

/ 17 Apr 2023

Solukon upgrades post-processing system for SLM Solutions NXG XII 600 3D printer

Solukon has announced that its SFM-AT1000-S depowdering system has been optimised with specific features for the post processing of parts 3D printed on the NXG XII 600 from SLM Solutions.

By Oliver Johnson

/ 17 Apr 2023

The NXG XII 600 variant of the SFM-AT1000-S with a short swivel arm. - Solukon

Desktop Metal Aidro subsidiary achieves two DNV certifications for metal 3D printing

Desktop Metal's Aidro subsidiary has achieved the 'first-ever global AM Manufacturer certification' from DNV, a leading risk management and quality assurance society for the oil & gas and maritime industries, for two metal printing technologies.

By Sam Davies

/ 14 Apr 2023

Hydraulic valves and coupons printed by Aidro on the Desktop Metal Shop System. - Desktop Metal

Stratasys rejects third takeover bid of $1.22 billion from Nano Dimension

Stratasys has announced that its board of directors has unanimously rejected the revised proposal received from Nano Dimension on April 3 to acquire Stratasys for 20.05 USD per share in cash, coming to a total of around 1.2 billion USD.

By Oliver Johnson

/ 13 Apr 2023

IMI Critical Engineering installs new 3D printer from SLM Solutions at South Korea facility

IMI Critical Engineering has enhanced its additive manufacturing capabilities with the installation of a new SLM 280 PS 3D printer from SLM Solutions at its facility in Paju City, Gyeonggi Province.

By Oliver Johnson

/ 13 Apr 2023

Cleveland start-up develops microplastic-filtering technology using Formlabs 3D printing

CLEANR, a start-up based out of Cleveland, Ohio, is creating microplastic-filtration technology, and has accelerated the development of its solutions for washing machine manufacturers with early access to the new Formlabs Automation Ecosystem.

By Oliver Johnson

/ 13 Apr 2023

'Telling your story is one thing, acting on your story is another.' - Hugo da Silva on Stratasys' acquisition of Covestro AM

As the Stratasys acquisition of Covestro Additive Manufacturing closed, TCT spoke to Hugo da Silva, former VP of Covestro AM and new VP of Strategy, M&A and Venturing at Stratasys.

By Sam Davies

/ 13 Apr 2023

The automotive grill shown here on a Stratasys Neo800 stereolithography system was 3D-printed with clear Somos WaterShed CX 11122. - Stratasys/ Covestro

Relativity Space shares key findings from Terran 1 launch; shifts focus to Terran R development

Relativity Space has shared key findings from Terran 1’s ‘Good Luck, Have Fun’ (GLHF) test flight last month, and has deemed 3D printed rockets as ‘structurally viable.’ Attention now turns to its larger Terran R rocket.

By Sam Davies

/ 12 Apr 2023

Quantica closes €14m Series A funding round ahead of NovoJet 3D printer shipments

Multi-material 3D printing firm Quantica has announced the closure of a 14 million EUR Series A financing round, which will be used to further industrialise and manufacture the first products based on its NovoJet multi-material inkjet technology.

By Sam Davies

/ 12 Apr 2023

Quantica's NovoJet C-7 multi-material 3D printing system. - Quantica

Dyndrite joins National Manufacturing Institute Scotland to further metal 3D printing research

Dyndrite has announced that it is now a member of the National Manufacturing Institute Scotland (NMIS). The company will collaborate with researchers from the NMIS Digital Factory focused on developing LPBF 3D printing process materials knowledge.

By Oliver Johnson

/ 12 Apr 2023

EOS launches Smart Fusion software to adjust laser power in metal LPBF 3D printing

The company says Smart Fusion will help to address the need for support structures, while reducing material use, post-processing requirements, and cost-per-part for metal additive manufacturing applications.

By Sam Davies

/ 12 Apr 2023

SLM Solutions and Danish Technological Institute to co-develop new metal AM process parameters

The Danish Technological Institute (DTI) is to develop new and fast process parameters for SLM Solutions' metal additive manufacturing systems, after the two organisations extended their collaboration.

By Sam Davies

/ 12 Apr 2023