Bayer and Solid Composites
Bayer MaterialScience and Solid Composites GmbH are partnering to develop thermoplastic polyurethane (TPU) powders for selective laser sintering. The start-up company based in Voerde, on the Lower Rhine, will be awarded a brand license to market the new high-tech materials under the name Desmosint. This opens the door to numerous potential applications, for instance in the automotive industry, in sports goods, robotics or aerospace engineering. Solid Composites is a spin-off of the Fraunhofer Institute for Environmental, Safety and Energy Technology (UMSICHT).
“Solid Composites has made a name for itself as a creative developer and supplier of thermoplastic powders for laser sintering and electrostatic coating, among other things, and is therefore the partner of choice for us when it comes to successfully marketing our TPU innovation,” explains Jürgen Hättig, TPU marketing specialist at Bayer MaterialScience.
Material gap closed
Until now, primarily soft, elastic materials and rigid thermoplastics, such as polyamide, were commercially available for selective laser sintering. “Our TPU products, with their high toughness, elasticity and strength, have now closed the gap between these material classes. And that opens the door to good application opportunities,” Hättig says. The first representative of the new class of TPUs is Desmosint X 92 A-1. One of its advantages is that the space in which the TPU is processed layer by layer must be maintained at a temperature of only 80 °C, in contrast to polyamide, for instance, which is processed at slightly below its melting temperature. “Because heating the processing space generates most of the total energy cost, this method results in significant savings on energy. And our TPU has only a very low tendency to warp, meaning the sintering process runs very stably. Lastly, the non-sintered powder does not age inside the processing space and therefore can be used for the next job, an enormous cost advantage compared to the classical laser sintering material PA12,” Hättig explains.
Potential use even in high-volume production
Selective laser sintering typically offers great design freedom and is particularly suited to the additive manufacturing of short to extremely short runs, for instance in the production of components like housing parts, bellows and hoses for full-size and luxury sedans. When used with the TPU products, the method also is ideal for producing custom components, such as orthopedic shoe inlays, athletic shoes, helmets and prosthetic devices. “Beyond that, the technology may prove suitable in high-volume production, too, particularly in those cases where part geometries are very intricate and the cost of injection molds high. In these scenarios, the use of several sintering machines can be more cost efficient,” Rechberger explains. At the end of the part’s service life, the plastic is fully recyclable.