Metal Additive Manufacturing News
Aston Martin
Divergent Technologies additively manufactures rear subframe for Aston Martin DBR22 design concept vehicle
Aston Martin has revealed that its DBR22 V-12 engined two-seater coach-built design concept is equipped with a 3D printed rear subframe. Read more
18 Aug 2022
LPE expands metal 3D printing service with new installation
Belfast-based LPE has purchased a second EOS M 290 machine, to handle increased demand for metal sintering parts. For metal 3D printing customers, this means quicker throughput, shorter lead times and larger production capabilities. Read more
16 Aug 2022
Purdue University
3D printed metal parts go hypersonic – at zero miles per hour
Researchers at Purdue University are using additively manufactured injector components, produced with Velo3D Sapphire printers, to create Mach 6 conditions for a ground-testing facility. Read more
12 Aug 2022
Intech Additive Solutions
Bhabha Atomic Research and Intech Additive Solutions collaborate for 3D printed miniature metal components
Intech Additive Solutions is a leading end-to-end provider for metal additive manufacturing systems, design for AM and AM software. The company has collaborated with Bhabha Atomic Research Centre (BARC). Read more
11 Aug 2022
NIST
NIST awards nearly 4 million USD in grants to support metals-based additive manufacturing
The U.S. Department of Commerce’s National Institute of Standards and Technology has awarded 3.7 million USD in grants to help address current and future barriers to widespread adoption of metals-based AM, through measurement science research. Read more
8 Aug 2022
EOS
Automotive Trim Developments acquires two new EOS M 290 metal 3D printers for component innovation
EOS, a leading supplier for manufacturing solutions through industrial 3D printing technology, has announced that Automotive Trim Developments (ATD) has installed two EOS M 290 metal 3D printers. Read more
3 Aug 2022
Hand-out ExLattice Inc
ExLattice receives NSF SBIR award to accelerate engineering simulation for additive manufacturing
ExLattice Inc, a manufacturing AI company, has announced it has received a Phase one award from the National Science Foundation (NSF) Small Business Innovation Research (SBIR) Program. Read more
18 Aug 2022
RAPID + TCT 2023: Speak at North America's most influential additive manufacturing event
RAPID + TCT is accepting abstracts that focus on case studies, research findings, and technical analysis for the 2023 conference. Read more
18 Aug 2022
Campbell Stoughton Jason Stoughton/NIST
ASTM International receives award to develop construction sector technology roadmap
The U.S. Department of Commerce’s National Institute of Standards and Technology (NIST) has awarded funding to ASTM International to develop a roadmap for guidance and adoption of advanced manufacturing technologies in the construction sector. Read more
17 Aug 2022
Apis Cor
Montana becomes first US state to give broad regulatory approval for 3D printing in construction
Building code regulators at state level in Montana have made history as the first in the country to approve 3D printed walls as an equal replacement for walls made with concrete masonry units (CMUs), or a standard cored concrete block. Read more
17 Aug 2022
Unsplash
3D printed human cornea developed by team of clinicians and scientists in India
Researchers in the city of Hyderabad, India, have successfully 3D printed an artificial cornea and transplanted it into a rabbit eye. Read more
17 Aug 2022
LPE expands metal 3D printing service with new installation
Belfast-based LPE has purchased a second EOS M 290 machine, to handle increased demand for metal sintering parts. For metal 3D printing customers, this means quicker throughput, shorter lead times and larger production capabilities. Read more
16 Aug 2022
Arnold Air Force Base
Arnold Air Force Base's Tunnel 9 team look to take 3D printing program to next dimension
Arnold Engineering Development Complex Hypervelocity Wind Tunnel 9 began with just adding a few 3D printing systems here and there. It recently evolved and become a large part of the manufacturing of components at the facility in White Oak, Maryland. Read more
16 Aug 2022
Geeetech
New high-speed 3D printer THUNDER announced by Geeetech
Geeetech is launching its new high-speed 3D printer named THUNDER on Kickstarter for early birds. The system will come with up to 300mm/s printing speeds, an all-metal designed body, a super strong cooling system and big printing volume. Read more
16 Aug 2022
Sponsored News
From Filament to Fashion: The rise of 3D printable clothing
How design pioneer Danit Peleg is redefining the status quo by designing 3D printable clothing with sustainable materials and real-time printing. Read more
Sponsored News
From Filament to Fashion: The rise of 3D printable clothing
How design pioneer Danit Peleg is redefining the status quo by designing 3D printable clothing with sustainable materials and real-time printing. Read more
Sponsored News
Calibration of Measurement Instrument: Why Is It Important?
Scantech details why it is important for manufacturers to inspect their parts. Read more
Sponsored News
Xometry
Boost 3D printed parts production with on-demand manufacturing
Get access to the world’s largest manufacturing capacities and complete projects up to 60% faster with Xometry. Seven 3D printing technologies, the Instant Quoting Engine, and more than forty materials. Read more
Forthcoming Events
America Makes MMX 2022
On August 16-18th, America Makes Members Meeting & Exchange (MMX) event will bring together the AM community for high-level conversations, presentations, and panels. Read more
TCT Asia 2022
China’s leading event for 3D printing and additive manufacturing heads to Shenzhen World Convention and Exhibition Center on August 31st - September 2nd. Read more
ALUMINIUM World Trade Fair and Conference
ALUMINIUM in Düsseldorf is the world's leading trade fair for the entire aluminium industry and its most important application industries, running from 27-29 September 2022. Read more
America Makes Fall TRX 2022
America Makes Fall TRX is a must-attend event for those looking to gain an in-depth understanding of the work being done to advance additive technology. Huntsville, Alabama, October 18-19, 2022. Read more
TCT Conference @ Formnext
The pre-eminent, in-person conference for additive manufacturing returns to Messe Frankfurt on 15-18th November for four days of questions, answers and connections. Read more
