Skip to content

BMW Group to install ATLIX xBUILD 5000 metal 3D printers at Additive Manufacturing Campus

The automotive company is expected to deploy the systems to support the production of aluminium components for prototyping and series use.

BMW Group to install ATLIX xBUILD 5000 metal 3D printers at Additive Manufacturing Campus

BMW is to install multiple ATLIX xBUILD 5000 laser powder bed fusion (LPBF) systems at its Additive Manufacturing Campus in Oberschleißheim.

The automotive company is expected to deploy the systems to support the production of aluminium components for prototyping and series use.

ATLIX has designed the xBUILD 5000 for 'unattended, continuous operation.' It is equipped with four 1.5 kW lasers, which operate simultaneously across the 500 x 500 x 600 mm build area, and is supported by closed-loop automation to minimise machine downtime.

Empty build cylinders are inserted on one side of the machine, with the machine then automatically loading the empty cylinder, auto-calibrating itself and starting to produce without operator intervention. Once a job is complete, the finished cylinder is automatically sealed gas-tight and unloaded on the opposite side, where it cools independently. Meanwhile, the next cylinder is loaded and production restarts within 15 minutes. An automatic multi-laser alignment system ensures consistent part quality across the entire build area.

Together, ATLIX says, these capabilities ensure increased build rates, while its 'compact design' maximises output per square metre of production floor. BMW, the company is confident, will experience better cost-per-part than with previous ATLIX machines.

“Our longstanding collaboration with the BMW Group provides an ideal foundation for applying the capabilities of the xBUILD 5000 in an industrial production environment,” said Matthias Himmelsbach, CEO of ATLIX. “The xBUILD 5000 was designed exactly for this purpose: fully automated lights-out production at the lowest possible cost per part, combined with repeatable quality and stable processes. We look forward to further strengthening and expanding this collaboration, which began in 2019 with the research project ‘IDAM’ (Industrialisation and Digitalisation of Additive Manufacturing), where the benefits of robust automation were first demonstrated.”

Earlier this year, BMW described additive manufacturing as a 'relevant building block throughout the vehicle lifecycle', with the technology now an established part of its daily operations. Its investment in the technology has expanded in recent years to include wire arc additive manufacturing (WAAM), and the company expects to launch a new vehicle next year featuring its first WAAM 3D-printed component.

ATLIX will be exhibiting at Formnext this week in Hall 12.0, Booth D99.

About the author

Sam Davies

Sam Davies

ManufacturingIQ Senior Editor, began writing for TCT Magazine in 2016 and has since become one of additive manufacturing’s go-to journalists. From breaking news to in-depth analysis, Sam’s insight and expertise are highly sought after.

All articles

Sign up to our newsletter

The week's biggest stories from this industry, direct to your inbox.

Personal information

More in Transport

See all

More from Sam Davies

See all

From our partners